3 Check the connector between IDC-PRCB PJ19 for proper connection and correct as necessary. 2 Check the M2 connector for proper drive coupling and correct as necessary. Remedy: 1 Check the connector between M2-PRCB PJ11 for proper connection and correct as necessary.The IDC sensor does not come into the condition where the level detection is not available (pressed position = IDC sensor shutter is closed) within a given period of time after the 2nd transfer release solenoid has turned ON.The IDC sensor does not come into the condition where the level detection is available (retracted position = IDC sensor shutter is open) within a given period of time after the 2nd transfer release solenoid has turned ON.Description: 2nd image transfer pressure / retraction failure.
0 Comments
Leave a Reply. |